Product Description
How to use:
1. Puncture the seal with the reverse side of the tube cap.
2. Clean the surfaces to be bonded; and make sure the surface is dry and free of dirt.
3. Squeeze about equal volume of "A" and "B" from each tube; and mix the two component thoroughly by the mixing ratio about 1:1 (by volume).
4. Apply the mixed adhesive to the surfaces to be bonded, and put the surfaces together and press.
5. The mixed glue will cure in 5 minutes (under 23°C/73°F). Once the glue cures initially, you will get about 70% of its full bonding strength.
1. Puncture the seal with the reverse side of the tube cap.
2. Clean the surfaces to be bonded; and make sure the surface is dry and free of dirt.
3. Squeeze about equal volume of "A" and "B" from each tube; and mix the two component thoroughly by the mixing ratio about 1:1 (by volume).
4. Apply the mixed adhesive to the surfaces to be bonded, and put the surfaces together and press.
5. The mixed glue will cure in 5 minutes (under 23°C/73°F). Once the glue cures initially, you will get about 70% of its full bonding strength.
Additional Information
| Product Model | 1001 |
| Appearance | Part A: light-green Viscous Liquid; Part B: light-pink Viscous Liquid |
| Initial Curing Time | Less than 5.0 minutes |
| Full Curing Time | 24 hours |
| Sheer Strength (mPa) | ≥20.0 |
| Tensile Strength (MPa) | ≥15.0 |
| Package Size | 20 kg/pail (44 lb/pail) |
| Viscosity (mPa.s) | Part A: 4.0 ~ 6.0; Part B: 8.0 ~ 10.0 |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.