Product Description
How to use:
1. Clean the surface of the thread or bolt by cleaner or solvent.
2. Mix the two component equably by the ratio of A:B = 100:3.4 (by weight). The mixture should be used in 6 hours.
3. Apply the mixture on the thread. Please note don't apply the product on the first 2-3 thread.
4. Put the adhesive coated thread or bolt in the oven of 70°C (158°F) for 30 minutes. You can use the pre-coated threads, once they're cooled off.
5. To use the threads pre-coated, just tighten the thread to necessary torque. Normally, 30-60 minutes after assembling, the tightened bolts can be put into use. However, for bolts working under extreme vibration, wait until it fully cures.
1. Clean the surface of the thread or bolt by cleaner or solvent.
2. Mix the two component equably by the ratio of A:B = 100:3.4 (by weight). The mixture should be used in 6 hours.
3. Apply the mixture on the thread. Please note don't apply the product on the first 2-3 thread.
4. Put the adhesive coated thread or bolt in the oven of 70°C (158°F) for 30 minutes. You can use the pre-coated threads, once they're cooled off.
5. To use the threads pre-coated, just tighten the thread to necessary torque. Normally, 30-60 minutes after assembling, the tightened bolts can be put into use. However, for bolts working under extreme vibration, wait until it fully cures.
Additional Information
| Product Model | 204 |
| Appearance | Part A: Red Paste; Part B: White Powder |
| Initial Curing Time | 30 min |
| Full Curing Time | 72 hrs |
| Working Temperature | -55~150°C ( 131~302°F) |
| Thread Size of Application | ≤ M36 |
| Breakaway Torque (N.m) | 30 |
| Package Size | Part A: 482g(17oz)/pail Part B: 16.5g(0.582oz)/bottle |
Product Tags
Add Your Tags:
Use spaces to separate tags. Use single quotes (') for phrases.