Main Features
1. The ratio of mixing is about 1:1, and it's not necessary to clean the surfaces for bonding very carefully.
2. The adhesive can cure rapidly at room-temperature.
3. For metal material, it has high bonding strength.

User's Guide
1. Use a clean cloth to wipe off the dust on the surfaces to be bonded.
2. You can apply the adhesive by one of the two methods here:
A -- Apply the two component on both surfaces separately. Spread component A on one surface and component B on the other surface by the ratio of 1:1, then put the two surfaces together. The adhesive will work in 20 minutes.
B -- Apply the mixture of A+B (A:B = 1:1) to one surface. First mix the two component by the ratio of 1:1. Then spread the mixture to one surface equally (just spread the mixture to the whole surface). Put the other surface together. The adhesive will work in 20 minutes.

Cautions
1. The roughness of the surfaces to be bonded should be less than 1.0 mm (0.04 inch).
2. You can use any container to hold the adhesive except copper and organic glass containers.
3. Before use, never mix the two component; and after use never put the two lids wrong.